EPower

Easy ordering, configuration and maintenance through modular design.
If your requirements change EPower Controller can be easily adapted to your needs.
Minimum spares holding – many options
configurable through a common driver module e.g. firing mode, load, phases, control etc.
Up to four power modules provide single and multi-phase control.
Software configurable options to bring you flexibility.

Specifications: Driver Module

Supply voltage	85 to 264V ac
Supply freqeuncy	47 to 63Hz
Power consumption	120W
Temperature limits	0 to 50°C operating, -10 to 70°C storage
Display	4 lines dot LCD matrix array
Communications	Modbus RTU 2 wire EIA485 Modbus TCP/IP 10baseT Ethernet, Profibus DPv1, DeviceNet network protocol
Inputs and outputs: standard	2 analogue inputs, 1 analogue output, 2 digital inputs, 2 relay outputs (1=Watchdog)
Optional modules (max 3)	Per module - 1 analogue input, 1 analogue output, 2 digital inputs, 1 relay
Measurement accuracy	Better than 1%
Remote panel	Dedicated remote panel port 32h8e panel indicator
Quickstart	Configurable by order code or on start up via dedicated front panel HMI
Predictive load management (PLM)	Optional module connecting up to 63 instruments over dedicated communications (CAN based). Configurable PLM (patent pending) optimises energy usage.
Approvals	CE (EN 60947-4-3), UL 508A

Click here for power module specification.